Think RC – Frequently Asked Questions mastercard securecode bank of india

This usually happens when a transaction is declined because of an incorrect address, cvv code, or expiration date. When a transaction is attempted, a temporary authorization may be placed on your card. This occurs when our payment processor is testing to confirm that your credit card account is active and has credit available to accommodate transactions. This can happen with each attempt. If you were declined four times, you may see four temporary authorizations on your card.

There is no need to contact us about these temporary authorizations.

• if your order was declined, this temporary transaction will be removed within 1-5 business days after it first appeared. ATM debit cards with a mastercard or visa logo sometimes take longer than regular credit cards to remove the transaction.Mastercard securecode bank of india

for this reason, we recommend using a regular credit card when purchasing online.

• if your order was not declined, this temporary transaction will become an actual transaction amount when the transaction settles.

You should be aware that all temporary authorization charges will temporarily reduce the account’s available credit by the anticipated amount.

For more information, please contact your bank or credit card company about how temporary transactions work and affect you as a credit card holder. RC helicopter questions 1. MUST READ for all RC helicopters 2. How to properly use and care for a lipo battery. 3. What is a 3 channel or 4 channel RC helicopter? 4. How do I keep my helicopter from spinning in circles?

The syma models were manufactured to be easy to assemble at the factory but not so easy to unassemble for repair.Mastercard securecode bank of india

Inner shaft replacement

First, please make sure the entire shaft needs to be replaced. In most instances the upper portion holding the balance bar and upper rotors is all that needs to be replaced.

If this is the case just unscrew the 2 screws holding the plastic portion to the metal shaft and transfer the blades, grips, and balance bar from the old part to the new part and screw it back onto the helicopter.

If the inner shaft is bent or has fallen out of the main gear, first remove the main blade/balance bar assembly from the helicopter by unscrewing the screws holding it onto the inner shaft.

After removing the upper blades slide the shaft out from under the helicopter.

If there are landing skids or other compenents in the way, you must remove them first.Mastercard securecode bank of india the gear at the bottom is usually glued onto the shaft.

The shaft can just be pulled off the gear but it requires some force.

To install the new one please use hobby glue or any other type of glue that can resist vibrations.

We suggest using gorilla glue but please make sure to let it set for at least 24 hours before flying.

Balance bar replacement

For the balance bar, unless you have a special tool, we recommend using wire snips to cut the old balance bar off.

After cutting off the balance bar, the pin should be easy to remove and the pin can be used to install the new one.

Update: some of the 2011+ models of syma helicopters have a screw that can be unscrewed for the balance bar making replacement easier.

4. Problem: S031 or S032 will not respond to the remote.Mastercard securecode bank of india

Helicopter flight problems can be from many different reasons but here are the most common issues.

1) check the gears to be sure nothing is blocking them from spinning at full speed. Common problems are carpet fibers and hair.

2) the next thing to check is the grip set. To do this you would turn the helicopter off. Then hold onto the gears and try to spin the blades.

If you are able to rotate the blades, your grip set will either need to be tightened, reglued, or replaced. The most common issue is the bottom grip sets on the smaller sized helicopters coming loose.

3) if the above methods do not work, it is most likely the motors or battery. Motors often wear out after use and if your helicopter has decreased power, it is usually caused by worn out motors that need to be replaced.Mastercard securecode bank of india

Motors should always be replaced in pairs. Make sure to also check the motor wiring for loose or crimped connections.

For batteries, if you have a voltage meter, a fully charged 3.7v battery should read approximately 4 volts.

If it below 3 volts, it is damaged and needs to be replaced. For a 7.4v battery, a fully charged battery should read aproximately 8 volts. If it below 6 volts, it is damaged and needs to be replaced.

10. How do I check the battery on my helicopter or know when it needs to be replaced?

Please note that this remote is a little hard to navigate for the beginner. Below is a table of LEFT ROW, RIGHT ROW, and VALUE. This corresponds to the remotes set up, hold down the MENU button for a few seconds and MODE will blink the value 2 at the bottom, push mode one more time to enter the menu.Mastercard securecode bank of india SUB will be blinking in one column and ELEV in the other, use the select button to navigate the menu in the SUB category (i.E. ELEV-AILE-THRO-RUDD). Then push the menu button to go to the next category (D/R) and use the select button again to navigate through this category (i.E. ELEV-AILE-RUDD) just like before, keep doing so to set all values.

Left row

Right row

Value

Comments

MODE

2

ELEV

SUB-F

0

AILE

SUB-L

0

THRO

SUB-F

0

RUDD

SUB-L

0

ELEV

D/R

100%

D/R ON S IS 40%

AILE

D/R

100%

D/R ON S IS 40%

RUDD

D/R

100%

D/R ON S IS 40%

ELEV

REV

REV

REV stands for reverse

AILE

REV

REV

THRO

REV

NOR

NOR stands for normal

RUDD

REV

REV

ELEV

EPA-F

100%

EPA stands for end point adjustment

AILE

EPA-R

100%

RUDD

EPA-R

100%

THRO

TRI-0

0%

TRI stands for control point adjustment

THRO

TRI-1

25%

THRO

TRI-2

50%

THRO

TRI-3

75%

THRO

TRI-4

mastercard securecode bank of india

100%

2. How do I bind the double horse 9116?

Double horse 9116 binding procedure

The double horse 4 channel 9116 helicopter has one of the most advanced digital 2.4ghz remotes on the market. Due to the many adjustable functions and settings on this remote, binding it can sometimes be a bit tricky.

There are two things that will prevent you from successfully binding your 9116 remote. One is timing, and the other is throttle position. Due to the advanced features of this remote there are multiple settings that effect the throttle position. Please note that we have all the default settings listed in question 1.

The first and most common problem is the throttle trim setting that sits vertically adjacent to the throttle stick. Even though the LCD screen indicates that the trim is in the center position, it may not be.Mastercard securecode bank of india this is due to the fact that every bar on the LCD screen indicates 10 position adjustments. In other words, only one bar will appear for every 10 times you adjust the button. This trim MUST be in the center position to properly bind with your helicopter. The only indicator of center position is one long beep as opposed to the short beeps for all other positions.

If this did not help in binding your remote, then some of your settings may have been changed. If this is the case please refer to our default settings in question 1. The menu settings that you will need to pay most attention to are the following:

THRO – SUB – should be at value: 000

THRO – REV – should be at value: NOR

THRO – TRI 0 – should be at value: 000%

If all of your settings are correct and you are still not able to bind you remote to your 9116 helicopter, it may be due to timing.Mastercard securecode bank of india the correct binding sequence is to first turn on your remote control and then to turn on the power switch to the helicopter. Please keep in mind that from the time you turn on the remote, you only have approximately 4 seconds to turn the helicopter switch on. I advise that you do the whole procedure as fast as possible. Please keep in mind as well that because the 9116 has a built in GYRO the helicopter must be flat on a level surface to properly initialize.

3. Rudder and tail rotor adjustment for the double horse 9116. Defa toys questions 1. How do I bind the defa toys 9025?

The simulator software that comes with the helicopter is freeware and openly available on the internet for download. If you are having problems with the software we suggest downloading the latest version from

mastercard securecode bank of india

Http://modelsimulator.Com/.

We do not provide support for this software. The software was designed to only run on windows 95/98/ME/2000/XP. Currently there is no solution for mac users.

For support and other questions please visit the forums here: http://modelsimulator.Com/forum/

If you have windows vista or windows 7, there are workarounds discussed in the forums here: http://modelsimulator.Com/forum/viewforum.Php?F=12.

If you have FMS already running here is a quick start to get it running.

Go to controls->analog control->highlight joystick interface and click mapping and calibration.

The settings should be as follows for the esky simulator remote:

Rudder

1

Elevator

2

Aileron

4

Throttle

3

Tail

1

Nick

2

Roll

4

Pitch

3

If you are using the remote that came with your esky RC helicopter, the settings should be as follows: (batteries must be installed and remote turned on):

mastercard securecode bank of india

Rudder

4

Elevator

2

Aileron

1

Throttle

3

Tail

4

Nick

2

Roll

1

Pitch

3

All INV and EXP checkboxes should be unchecked. Click calibrate and follow the instructions.

9. What are the gain and proportional controls on the receiver?